Why does cycling cause pain, and what can you do about it?
Your ride starts well: a scenic route, fresh air and a comfortable pace. A few kilometres later, you find yourself shifting your hands on the handlebars, adjusting your position on the saddle and thinking about the next stop. If that sounds familiar, it is worth checking what might be affecting your comfort on the bike.
Cycling improves cardiovascular fitness and puts less impact stress on your joints than running. However, an unsuitable riding position, prolonged pressure on certain areas of the body or excessive effort can still cause discomfort. A more enjoyable ride starts with the right bike and setup, alongside suitable fitness and riding habits.
Start by checking that your bike fits you
When choosing a bike, gears, suspension and terrain are often the first things that come to mind. But the right frame size and riding position are just as important for comfort. Saddle height, handlebar height and reach all affect how you sit, pedal and control the bike.
During a test ride, check that you can reach the handlebars without overstretching, operate the brakes easily and pedal smoothly. Your position should also suit the type of riding you plan to do: a leisurely ride on a maintained cycle path has different demands from a more challenging ride on rough terrain.
If you feel uncomfortable on the bike, a professional assessment of your riding position is a sensible first step. A comprehensive bike fitting takes your individual physical characteristics and riding style into account. If discomfort persists despite an appropriate setup, training load, fitness and possible underlying health issues should also be considered.
Back and neck pain
A saddle that is too high may cause your pelvis to rock as you try to reach the pedal at the bottom of the stroke. This can put additional strain on your lower back. If the handlebars are too low or too far away, you may have to lean further forward and lift your head more to see the route ahead.
Road cyclists often adopt a low position to reduce aerodynamic drag, but this posture does not suit everyone. For recreational riding, a slightly more upright position may feel more comfortable. You should be able to reach the handlebars without overstretching, while keeping your shoulders relaxed and your elbows slightly bent.
Tingling hands and sore wrists
Resting your weight on your palms for prolonged periods can increase pressure on nerves, causing tingling or numbness in your fingers. Gripping the handlebars too tightly or riding with your wrists sharply bent can also contribute to discomfort.
Keep your grip firm enough to control the bike safely, without squeezing unnecessarily. Where the handlebar design and riding conditions allow, vary your hand position occasionally while maintaining control. Suitable handlebar grips and padded cycling gloves may also help cushion pressure and vibration.
Do not simply ignore tingling. Take a break and relieve the pressure on your hands rather than continuing in a position that is causing discomfort.
Saddle discomfort: softer is not always better
When sitting on the saddle becomes uncomfortable, a softer one may seem like the easiest solution. However, the amount of padding is only one factor. The saddle’s shape, width and tilt also matter, along with the support it provides in your riding position.
An upright posture requires different support from a sportier position in which your torso leans further forward. A saddle that works well for a friend may therefore be unsuitable for you.
If you keep sliding forwards or shifting around to find better support, check your current saddle’s adjustment before buying a replacement. The saddle itself is not always the problem.
Knee and foot pain
The load on your knees depends on your leg position and the resistance you pedal against. A saddle that is too low or too high can contribute to discomfort; your knee should remain slightly bent at the bottom of the pedal stroke. However, the location of the pain alone cannot reliably tell you which adjustment is needed.
Gear choice also matters. Spending a long time pushing a hard gear increases the load on your knees, so shift into an easier gear before a climb. Aim for a smooth pedalling rhythm without excessive strain. If pain develops, reduce your effort and stop riding if necessary.
If your feet feel uncomfortable or tingly, check whether your footwear is too tight. Tight shoes or overtightened laces, straps and buckles can create additional pressure. If you use clipless pedals, the position of the cleats on your cycling shoes also affects foot alignment.
Build up gradually to longer rides
The right bike matters, but your body also needs to be ready for the route. If you are used to short, flat rides, a ride lasting several hours with plenty of climbing will be a much bigger challenge. Increase distance and difficulty gradually, and allow enough recovery time between rides.
Start at an easy pace and plan breaks on longer routes. Notice when discomfort appears: straight away, after several kilometres, during climbs or after a change of equipment. This can help you identify the circumstances that contribute to the problem.
Alongside cycling fitness, work on strength and mobility. Your core muscles help stabilise your body as you pedal, so it makes sense to complement cycling with exercises for your abdominal and back muscles, as well as other major muscle groups. A plank is one option. Choose a variation you can perform well, and prioritise good form over holding it for a long time.
If pain or numbness continues after the ride, gets worse or interferes with everyday activities, consult a doctor. For recurring problems, a physiotherapist can also help you choose appropriate exercises.
Find what works for you
Every cyclist has different preferences when it comes to riding position, equipment and pace. Take the time to find what feels comfortable, make adjustments where needed and choose a shorter or easier route whenever it suits you. The aim is to keep cycling enjoyable, so you look forward to getting back on your bike.

